﻿<?xml version="1.0" encoding="utf-8"?>
<ManageTool>
	<ToolTips>
		<!-- GTBSI -->
    <ToolTip Command="GTBSI" ControlID="APN" Caption="APN" Text="Access Point Name"/>
		<ToolTip Command="GTBSI" ControlID="APNUsername" Caption="User name" Text="User name"/>
		<ToolTip Command="GTBSI" ControlID="APNPassword" Caption="Password" Text="Password"/>
		<!-- GTSRI -->
		<ToolTip Command="GTSRI" ControlID="ReportMode" Caption="Report Mode" Text="This defines the transmission mode between the backend server and unit."/>
		<ToolTip Command="GTSRI" ControlID="BufferMode" Caption="Buffer Mode" Text="When enabled, the report messages will be stored to unit memory if no GSM/GPRS network covering."/>
		<ToolTip Command="GTSRI" ControlID="MainServerIP" Caption="Main Server IP" Text="The IP address or the domain name of the main backend server."/>
		<ToolTip Command="GTSRI" ControlID="MainServerPort" Caption="Main Server Port" Text="The port of the main backend server."/>
		<ToolTip Command="GTSRI" ControlID="BackupServerIP" Caption="Backup Server IP" Text="The IP address of the backup backend server."/>
		<ToolTip Command="GTSRI" ControlID="BackupServerPort" Caption="Backup Server Port" Text="The port of the backup backend server."/>
		<ToolTip Command="GTSRI" ControlID="SMSGateway" Caption="SMS Gateway" Text="Maximum 20 characters including the optional national code starting with “+” for SMS messages sending."/>
    <ToolTip Command="GTSRI" ControlID="SMSACKEnable" Caption="SMS ACK Enable" Text="This defines whether the ACK confirmation should respond by SMS when the command was sent by SMS."/>
		<ToolTip Command="GTSRI" ControlID="HeartbeatInterval" Caption="Heartbeat Interval" Text="The interval of sending heartbeat package message which makes GPRS connection alive."/>
		<ToolTip Command="GTSRI" ControlID="SACKEnable" Caption="SACK Enable" Text="This defines whether the backend server should respond to unit with SACK message when receiving messages from the unit."/>
    <!--<ToolTip Command="GTSRI" ControlID="ProtocolFormat" Caption="Protocol Format" Text="This defines the format of the report message sent from the device to the backend server."/>-->
    <ToolTip Command="GTSRI" ControlID="ConnectionRetryPattern" Caption="Connection Retry Pattern" Text="This defines the method of terminal retrying to establish TCP connection with backend server when there is no valid connection at present."/>
    <ToolTip Command="GTSRI" ControlID="SpecialSACKEnable" Caption="Special SACK Enable" Text="This defines whether the backend server will respond to the terminal with SACK messages when receiving messages from the terminal.  "/>
    <!-- GTQSS -->
		<ToolTip Command="GTQSS" ControlID="APN" Caption="APN" Text="Access Point Name"/>
		<ToolTip Command="GTQSS" ControlID="APNUserName" Caption="APN User Name" Text="Username"/>
		<ToolTip Command="GTQSS" ControlID="APNPassword" Caption="APN Password" Text="Password"/>
		<ToolTip Command="GTQSS" ControlID="ReportMode" Caption="Report Mode" Text="This defines the transmission mode between the backend server and unit."/>
		<ToolTip Command="GTQSS" ControlID="BufferMode" Caption="Buffer Mode" Text="When enabled, the report messages will be stored to unit memory if no GSM/GPRS network covering."/>
		<ToolTip Command="GTQSS" ControlID="MainServerIP" Caption="Main Server IP" Text="The IP address or the domain name of the main backend server."/>
		<ToolTip Command="GTQSS" ControlID="MainServerPort" Caption="Main Server Port" Text="The port of the main backend server."/>
		<ToolTip Command="GTQSS" ControlID="BackupServerIP" Caption="Backup Server IP" Text="The IP address of the backup backend server."/>
		<ToolTip Command="GTQSS" ControlID="BackupServerPort" Caption="Backup Server Port" Text="The port of the backup backend server."/>
		<ToolTip Command="GTQSS" ControlID="SMSGateway" Caption="SMS Gateway" Text="Maximum 20 characters including the optional national code starting with “+” for SMS messages sending."/>
		<ToolTip Command="GTQSS" ControlID="HeartbeatInterval" Caption="Heartbeat Interval" Text="The interval of sending heartbeat package message which makes GPRS connection alive."/>
		<ToolTip Command="GTQSS" ControlID="SACKEnable" Caption="SACK Enable" Text="This defines whether the backend server should respond to unit with SACK message when receiving messages from the unit."/>
    <ToolTip Command="GTQSS" ControlID="ProtocolFormat" Caption="Protocol Format" Text="This defines the format of the report message sent from the device to the backend server."/>
    <ToolTip Command="GTQSS" ControlID="ConnectionRetryPattern" Caption="Connection Retry Pattern" Text="This defines the method of terminal retrying to establish TCP connection with backend server when there is no valid connection at present."/>
    <!-- GTCFG -->
    <ToolTip Command="GTCFG" ControlID="NewPassword" Caption="New Password" Text="Set to replace the old password."/>
		<ToolTip Command="GTCFG" ControlID="DeviceName" Caption="Device Name" Text="An ASCII string to represent the name of unit."/>
		<ToolTip Command="GTCFG" ControlID="ODOEnable" Caption="ODO Enable" Text="Enable/disable to calculate the total mileage."/>
		<ToolTip Command="GTCFG" ControlID="ODOInitialMileage" Caption="ODO Initial Mileage" Text="The initial value for calculating the total mileage."/>		
		<ToolTip Command="GTCFG" ControlID="ReportCompositionMask" Caption="Report Composition Mask" Text="Bitwise report mask to configure the composition of report message."/>
		<ToolTip Command="GTCFG" ControlID="PowerSavingEnable" Caption="Power Saving Enable" Text="Set mode of power saving function."/>
		<ToolTip Command="GTCFG" ControlID="EventMask" Caption="Event Mask" Text="Bitwise mask to configure which event message should be sent to the backend server."/>
		
		<ToolTip Command="GTCFG" ControlID="LEDOn" Caption="LED On" Text="Configure the working mode of LEDs."/>
		<ToolTip Command="GTCFG" ControlID="InfoReportEnable" Caption="Info Report Enable" Text="Enable/disable unit information report function."/>
		<ToolTip Command="GTCFG" ControlID="InfoReportInterval" Caption="Info Report Interval" Text="Reporting interval for sending unit information."/>
		<ToolTip Command="GTCFG" ControlID="LocationByCall" Caption="Location By Call" Text="Configure how to handle an incoming call."/>
		
    <ToolTip Command="GTCFG" ControlID="CheckAllReportMask" Caption="Check All" Text="Pick out all pickings."/>
    <ToolTip Command="GTCFG" ControlID="CheckAllEventMask" Caption="Check All" Text="Pick out all pickings."/>
    <ToolTip Command="GTCFG" ControlID="AgpsMode" Caption="Agps Mode" Text="A numeric to indicate whether to enable AGPS."/>
    <ToolTip Command="GTCFG" ControlID="GSMReportCB" Caption="GSM Report" Text="Control how or when to report cells’ information."/>
    <ToolTip Command="GTCFG" ControlID="GSMReportCLB" Caption="GSM Report" Text="Control how or when to report cells’ information."/>
    <ToolTip Command="GTCFG" ControlID="GPSLostTime" Caption="GPS lost time" Text="If GPS signal is lost and last for 'GPS lost time', GPS lost event occurred, and +RESP:GTGSS will be sent to the backup server"/>
		<!-- GTTOW -->
		<ToolTip Command="GTTOW" ControlID="TowEnable" Caption="Tow Enable" Text="Enable/disable tow alarm."/>
		<ToolTip Command="GTTOW" ControlID="EngineOfftoTow" Caption="Engine Off to Tow" Text="A duration threshold to judge whether the moving terminal is considered being towed after its engine off."/>
		<ToolTip Command="GTTOW" ControlID="FakeTowDelay" Caption="Fake Tow Delay" Text="A duration threshold to judge whether unit with engine off is in fake tow after it changes to move from stillness."/>
		<ToolTip Command="GTTOW" ControlID="TowInterval" Caption="Tow Interval" Text="Reporting interval for sending tow alarm message."/>
		<ToolTip Command="GTTOW" ControlID="RestDuration" Caption="Rest Duration" Text="A duration threshold to judge whether unit enters stillness status."/>
		<ToolTip Command="GTTOW" ControlID="MotionDuration" Caption="Motion Duration" Text="A duration threshold to judge whether unit enters motion status."/>
		<ToolTip Command="GTTOW" ControlID="MotionThreshold" Caption="Motion Threshold" Text="The threshold for on-board motion sensor to judge whether unit is moving."/>
		<!-- GTOUT -->
		<!--<ToolTip Command="GTOUT" ControlID="Output1Status" Caption="Output1 Status" Text="Set the final status of the output port 1 when the waveform remains high or low."/>
    <ToolTip Command="GTOUT" ControlID="Duration_Output1" Caption="Duration Output1" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTOUT" ControlID="ToggleTimes_Output1" Caption="Toggle Times Output1" Text="The number of square-wave generated from output port2."/>
    --><!--<ToolTip Command="GTOUT" ControlID="Output2Status" Caption="Output2 Status" Text="Set the final status of the output port 2 when the waveform remains high or low."/>
		<ToolTip Command="GTOUT" ControlID="Duration_Output2" Caption="Duration Output2" Text="Set half-cycle time of square-wave."/>
		<ToolTip Command="GTOUT" ControlID="ToggleTimes_Output2" Caption="Toggle Times Output2" Text="The number of square-wave generated from output port2."/>--><!--
    <ToolTip Command="GTOUT" ControlID="DOSReport" Caption="DOS Report" Text="Output status change with wave shape 1, whether or not report +RESP: GTDOS."/>-->
		
    <!-- GTEPS -->
		<ToolTip Command="GTEPS" ControlID="Mode" Caption="Mode" Text="Working mode of the external power supply monitoring."/>
		<ToolTip Command="GTEPS" ControlID="MinThreshold" Caption="Min Threshold" Text="The lower limit to the voltage of the external power supply to trigger the alarm."/>
		<ToolTip Command="GTEPS" ControlID="MaxThreshold" Caption="Max Threshold" Text="The upper limit to the voltage of the external power supply to trigger the alarm."/>
		<ToolTip Command="GTEPS" ControlID="SamplePeriod" Caption="Sample Period" Text="The sampling period to measure the external power supply."/>
		<ToolTip Command="GTEPS" ControlID="DebounceTime" Caption="Debounce Time" Text="The time for debouncing to avoid exceptional voltage drop of the external power supply."/>
		<ToolTip Command="GTEPS" ControlID="SyncWithFRI" Caption="Sync With FRI" Text="Besides the +RESP:GTEPS alarm report, the device can also send the voltage of external power supply periodically along with the fixed report message."/>
    <ToolTip Command="GTEPS" ControlID="VoltageMarginError" Caption="Voltage Margin Error" Text="This parameter will use with &lt;Min Threshold&gt; and &lt;Max Threshold&gt; parameters together,it express that the voltage margin error of the &lt;Min Threshold&gt; and  &lt;Max Threshold&gt; parameters, if the current value of voltage detection include in the voltage margin error of the min and max threshold, this voltage value will not be processed."/>
    <ToolTip Command="GTEPS" ControlID="DebounceVoltageThreshold" Caption="Debounce Voltage Threshold" Text="This parameter will be used with &lt;Debounce Time&gt; together, if the voltage drops or bursts exceptionally greater than &lt;Debounce Voltage Threshold&gt;, the device will start to debounce voltage by &lt;Debounce Time&gt;."/>
    <ToolTip Command="GTEPS" ControlID="MPFValidityTime" Caption="MPF Validity Time" Text="The validity time for detecting the device disconnecting main power supply."/>
    
    <!-- GTDIS -->
		<ToolTip Command="GTDIS" ControlID="SamplePeriod_1" Caption="Sample Period" Text="The sampling period of the non-interruptible input port."/>
    <ToolTip Command="GTDIS" ControlID="IgnitionDetectionMode" Caption="Ignition Detection Mode" Text="A numeral to define the ignition detection mode."/>
    
    <!--<ToolTip Command="GTDIS" ControlID="EnableThisInput_2" Caption="Enable Input 1" Text="Enable/disable the interrupt input1."/>
		<ToolTip Command="GTDIS" ControlID="DebounceTime_2" Caption="Debounce Time 1" Text="The time for debouncing."/>
    <ToolTip Command="GTDIS" ControlID="ValidityTime" Caption="Validity Time" Text=" The validity time of the input port"/>-->
		
    <!-- GTIOB --><!--
		<ToolTip Command="GTIOB" ControlID="IOBID" Caption="IOB ID" Text="The IO binding ID for user to define."/>
		<ToolTip Command="GTIOB" ControlID="InputMask" Caption="Input Mask" Text="Bitwise mask for the combination of input ports."/>
		<ToolTip Command="GTIOB" ControlID="TriggerMask" Caption="Trigger Mask" Text="Bitwise mask for the combination of trigger conditions from combined input ports."/>
		<ToolTip Command="GTIOB" ControlID="SamplePeriod" Caption="Sample Period" Text="The sample period to check status of all combined digital input ports within one IO binding."/>
		<ToolTip Command="GTIOB" ControlID="OutputID" Caption="Output ID" Text="Specify the ID of the output port to generate specified waveform after trigger conditions meet."/>
		<ToolTip Command="GTIOB" ControlID="OutputStatus" Caption="Output Status" Text="Set the final status of the output port when the waveform remains high or low."/>
		<ToolTip Command="GTIOB" ControlID="Duration" Caption="Duration" Text="Set half-cycle time of square-wave."/>
		<ToolTip Command="GTIOB" ControlID="ToggleTimes" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>-->
		
    <!-- GTTMA -->
		<ToolTip Command="GTTMA" ControlID="Sign" Caption="Sign" Text="Indicate the positive or negative of the local time offset to UTC."/>
		<ToolTip Command="GTTMA" ControlID="HourOffset" Caption="Hour Offset" Text="UTC offset in hours."/>
		<ToolTip Command="GTTMA" ControlID="MinuteOffset" Caption="Minute Offset" Text="UTC offset in minutes."/>
		<ToolTip Command="GTTMA" ControlID="DaylightSaving" Caption="Day light Saving" Text="Enable/disable daylight saving time."/>
		<ToolTip Command="GTTMA" ControlID="UTCTime" Caption="UTC Time" Text="UTC time used to adjust local time."/>
		<!-- GTFRI -->
		<ToolTip Command="GTFRI" ControlID="Mode" Caption="Mode" Text="The working mode of fixed report."/>
		<ToolTip Command="GTFRI" ControlID="DiscardNoFix" Caption="Discard No Fix" Text="Disable/enable reporting when there is no GPS fixing"/>
		<ToolTip Command="GTFRI" ControlID="PeriodEnable" Caption="Period Enable" Text="Enable/disable reporting within the time range specified by Start Time and End Time."/>
		<ToolTip Command="GTFRI" ControlID="StartTime" Caption="Start Time" Text="The start time of the schedule fixed report."/>
		<ToolTip Command="GTFRI" ControlID="EndTime" Caption="End Time" Text="The end time of the schedule fixed report."/>		
		<ToolTip Command="GTFRI" ControlID="SendInterval" Caption="Send Interval" Text="Timed cycle to send report to the backend server."/>
		<ToolTip Command="GTFRI" ControlID="Distance" Caption="Distance" Text="The amount of space between two places.\nThe specified distance if unit passed every time, it will send the position information."/>
		<ToolTip Command="GTFRI" ControlID="Mileage" Caption="Mileage" Text="Mileage is the total of distance.\nThe specified mileage if unit passed every time, it will send the position information."/>
		<ToolTip Command="GTFRI" ControlID="CornerReport" Caption="Corner Report" Text="The threshold to determine whether unit is turning around a corner."/>
		<ToolTip Command="GTFRI" ControlID="IGFReportInterval" Caption="IGF Report Interval" Text="Period to fix and send the position information when ignition off and Power Saving Mode is set to 2."/>
		<!-- GTGEO -->
		<ToolTip Command="GTGEO" ControlID="GEOID" Caption="GEO ID" Text="ID of the Geo-Fence."/>
		<ToolTip Command="GTGEO" ControlID="Mode" Caption="Mode" Text="The working mode of the Geo-Fence alarm."/>
		<ToolTip Command="GTGEO" ControlID="Latitude" Caption="Latitude" Text="The latitude of a point which is defined as the center of the Geo-Fence circular region."/>
		<ToolTip Command="GTGEO" ControlID="Longitude" Caption="Longitude" Text="The longitude of a point which is defined as the center of the Geo-Fence circular region."/>
		<ToolTip Command="GTGEO" ControlID="Radius" Caption="Radius" Text="The radius of the Geo-Fence circular region."/>
		<ToolTip Command="GTGEO" ControlID="CheckInterval" Caption="Check Interval" Text="The interval of GPS checking for the Geo-Fence alarm."/>
		<ToolTip Command="GTGEO" ControlID="TriggerMode" Caption="Trigger Mode" Text="The Trigger mode of the Geo-Fence alarm."/>
    <ToolTip Command="GTGEO" ControlID="TriggerReport" Caption="Trigger Report" Text="Whether to report +RESP:GTGES message when the specified trigger mode is triggered and when the Geo-Fence is cancelled."/>
		<!-- GTSPD -->
		<ToolTip Command="GTSPD" ControlID="Mode" Caption="Mode" Text="The working mode of the speed alarm."/>
		<ToolTip Command="GTSPD" ControlID="MinSpeed" Caption="Min Speed" Text="Minimum speed limit."/>
		<ToolTip Command="GTSPD" ControlID="MaxSpeed" Caption="Max Speed" Text="Maximum speed limit."/>
		<ToolTip Command="GTSPD" ControlID="Duration" Caption="Validity" Text="A period of time that the speed meets and maintains in the alarm condition."/>
		<ToolTip Command="GTSPD" ControlID="SendInterval" Caption="Send Interval" Text="The interval of sending speed alarm message if unit maintains in the alarm condition."/>
		<!-- GTSOS --><!--
		<ToolTip Command="GTSOS" ControlID="Mode" Caption="Mode" Text="The working mode of SOS function."/>
		<ToolTip Command="GTSOS" ControlID="DigitalInputID" Caption="Digital Input ID" Text="ID of the digital input port which triggers the SOS function."/>
		<ToolTip Command="GTSOS" ControlID="SOSNumber" Caption="SOS Number" Text="The emergency phone number."/>
		<ToolTip Command="GTSOS" ControlID="OutputID" Caption="Output ID" Text="Specify the ID of the output port to generate specified waveform after SOS is initiate."/>
		<ToolTip Command="GTSOS" ControlID="OutputStatus" Caption="Output Status" Text="Set the final status of the output port when the waveform remains high or low."/>
		<ToolTip Command="GTSOS" ControlID="Duration" Caption="Duration" Text="Set half-cycle time of square-wave."/>
		<ToolTip Command="GTSOS" ControlID="ToggleTimes" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>-->

    <!-- GTRTO -->
    <ToolTip Command="GTRTO" ControlID="SubCommand" Caption="Sub Command" Text="It is used to retrieve information from unit or control the unit to execute certain actions."/>
    <ToolTip Command="GTRTO" ControlID="SingleATCommand" Caption="Single AT command" Text="Including all the AT Command that we defined."/>
    <ToolTip Command="GTRTO" ControlID="MaskChoice" Caption="Mask Choice" Text="Choice whether to Mask."/>
    <ToolTip Command="GTRTO" ControlID="configurationMask" Caption="configuration Mask" Text="the configuration Mask."/>
    <ToolTip Command="GTRTO" ControlID="OutputDirection" Caption="Output Direction" Text="This parameter determines the destination that the response message of the RTO command will be reported to. "/>
    <!--<ToolTip Command="GTRTO" ControlID="Rest" Caption="Single command" Text="Including all the AT Command that we defined."/>-->
    <ToolTip Command="GTRTO" ControlID="SatelliteinformationMask" Caption="Satell iteinformation Mask" Text="Select parameters for different satellite information "/>
    <!-- GTPIN -->
		<ToolTip Command="GTPIN" ControlID="EnableAutoUnlockPIN" Caption="Enable Auto-Unlock PIN" Text="Enable/Disable the auto-unlock PIN function."/>
		<ToolTip Command="GTPIN" ControlID="PIN" Caption="PIN" Text="Code used to unlock the SIM PIN"/>
		<!-- GTOWH -->
		<ToolTip Command="GTOWH" ControlID="Mode" Caption="Mode" Text="Working mode"/>
		<ToolTip Command="GTOWH" ControlID="DayOfWork" Caption="Day Of Work" Text="Bitwise mask to specify the working days in a week."/>
		<ToolTip Command="GTOWH" ControlID="WorkingHoursStart1" Caption="Working Hours Start1" Text="The first period of the start working hours in a day."/>
		<ToolTip Command="GTOWH" ControlID="WorkingHoursEnd1" Caption="Working Hours End1" Text="The first period of the end working hours in a day."/>
		<ToolTip Command="GTOWH" ControlID="WorkingHoursStart2" Caption="Working Hours Start2" Text="The second period of the start working hours in a day."/>
		<ToolTip Command="GTOWH" ControlID="WorkingHoursEnd2" Caption="Working Hours End2" Text="The second period of the end working hours in a day."/>
		<!--<ToolTip Command="GTOWH" ControlID="DigitalInputID" Caption="Digital Input ID" Text="ID of the digital input port."/>-->
		<ToolTip Command="GTOWH" ControlID="CheckAllDayOfWork" Caption="Check All" Text="Pick out all day of work."/>
		<!-- GTDOG -->
		<ToolTip Command="GTDOG" ControlID="Mode" Caption="Mode" Text="Working mode"/>
		<ToolTip Command="GTDOG" ControlID="IgnitionFrequency" Caption="Ignition Frequency" Text="If the time interval between two adjacent ignition on events is greater than this value, \n unit will automatically reboot when ignition on."/>
		<ToolTip Command="GTDOG" ControlID="Interval" Caption="Interval" Text="The interval which is in the unit of day to reboot unit in day."/>
		<ToolTip Command="GTDOG" ControlID="Time" Caption="Time" Text="The time clock to perform the reboot operation after 'Interval' is met."/>
		<ToolTip Command="GTDOG" ControlID="ReportBeforeReboot" Caption="Report Before Reboot" Text="Whether to report the +RESP:GTDOG message before reboot."/>
		<!--<ToolTip Command="GTDOG" ControlID="InputID" Caption="Input ID" Text="ID of the digital input port which is used to trigger the manually reboot in despite of working mode."/>-->
    <ToolTip Command="GTDOG" ControlID="GSMInterval" Caption="GSM Interval" Text="The interval to reboot the device when in no GSM singal situation.0 means do not reboot the device."/>
    <ToolTip Command="GTDOG" ControlID="PDPInterval" Caption="PDP Interval" Text="The interval to reboot thr device when GPRS unable to register successfully. 0 means do not reboot the device."/>
    <!-- GTIDL -->
		<ToolTip Command="GTIDL" ControlID="Mode" Caption="Mode" Text="Working mode of excessive idling detection"/>
		<ToolTip Command="GTIDL" ControlID="TimeToStationary" Caption="Time To Stationary" Text="If the vehicle is detected to be stationary with ignition on for this time long, it is considered to be in idling status."/>
		<ToolTip Command="GTIDL" ControlID="TimeToMovement" Caption="Time To Movement" Text="The time of the vehicle is considered to leave idling status."/>
    <ToolTip Command="GTIDL" ControlID="Debouncedistance" Caption="Debounce distance" Text=" if vehicle moves further than &lt;Debounce distance &gt;,the vehicle will be considered to leave idling status. "/>
    <!-- GTHMC -->
		<ToolTip Command="GTHMC" ControlID="HourMeterEnable" Caption="Hour Meter Enable" Text="Enable/disable hour meter counter function."/>
		<ToolTip Command="GTHMC" ControlID="InitialHourMeterCount" Caption="Initial Hour Meter Count" Text="Initial hours meter count."/>
    <!-- GTHBM -->
    <ToolTip Command="GTHBM" ControlID="Mode" Caption="Mode" Text="Working mode.      "/>
    <ToolTip Command="GTHBM" ControlID="HighSpeed" Caption="High Speed" Text="If the last known speed of unit read from GPS is greater or equal to &lt;High Speed&gt;, \nthe vehicle that the terminal is attached to is considered to be high speed."/>
    <ToolTip Command="GTHBM" ControlID="HighSpeedVhb" Caption="High Speed Vhb" Text="The threshold for harsh braking in high speed level."/>
    <ToolTip Command="GTHBM" ControlID="HighSpeedVha" Caption="High Speed Vha" Text="The threshold for harsh acceleration in high speed level."/>
    
    <ToolTip Command="GTHBM" ControlID="MediumSpeed" Caption="Medium Speed" Text="If the last known speed is less than 'High Speed' while greater or equal to &lt;Medium Speed&gt;, \nthe vehicle is considered to be medium speed."/>
    <ToolTip Command="GTHBM" ControlID="MediumSpeedVmb" Caption="Medium Speed Vmb" Text="The threshold for harsh braking in medium speed level."/>
    <ToolTip Command="GTHBM" ControlID="MediumSpeedVma" Caption="Medium Speed Vma" Text="The threshold for harsh acceleration in medium speed level."/>
    <ToolTip Command="GTHBM" ControlID="LowSpeedVlb" Caption="Low Speed Vlb" Text="The threshold for harsh braking in low speed level."/>
    <ToolTip Command="GTHBM" ControlID="LowSpeedVla" Caption="Low Speed Vla" Text="The threshold for harsh acceleration in low speed level."/>
    
    
    <!--GTJDC--><!--
    <ToolTip Command="GTJDC" ControlID="Mode" Caption="Mode" Text="Working mode.0: Disable this function;1: Enable this function."/>
    <ToolTip Command="GTJDC" ControlID="SignalThreshold" Caption="Signal Threshold" Text="Jamming detection algorithm used to compare the difference of two signal strength detects."/>
    <ToolTip Command="GTJDC" ControlID="JammingCellNumberThreshold" Caption="Jamming Cell Number Threshold" Text="Jamming detection algorithm uses this parameter to judge whether the device is currently being jammed."/>
    <ToolTip Command="GTJDC" ControlID="EnterJammingTimerThreshold" Caption="Enter Jamming Timer Threshold" Text="When the device detects the jamming, the device based on this parameter to trigger the enter Jamming event."/>
    <ToolTip Command="GTJDC" ControlID="QuitJammingTimerThreshold" Caption="Quit Jamming Timer Threshold" Text="When the device quits the jamming, the device based on this parameter to trigger the quit Jamming event."/>
    <ToolTip Command="GTJDC" ControlID="OutputID" Caption="Output ID" Text="Specify the ID of the output port to generate specified waveform after the trigger condition meets."/>
    <ToolTip Command="GTJDC" ControlID="OutputStatus" Caption="Output Status" Text="Set the final status of the output port when the waveform remains high or low."/>
    <ToolTip Command="GTJDC" ControlID="Duration" Caption="Duration" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTJDC" ControlID="ToggleTimes" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>-->
     
    <!--GTWLT-->
    <ToolTip Command="GTWLT" ControlID="CallFilter" Caption="Call Filter" Text="Bitwise mask to configure the white list for special function."/>
    <ToolTip Command="GTWLT" ControlID="StartIndex" Caption="Start Index" Text="The index range of the white list to which thie phone numbers are to be updated."/>
    <ToolTip Command="GTWLT" ControlID="EndIndex" Caption="End Index" Text="The index range of the white list to which thie phone numbers are to be updated."/>

    <!-- GTHRM-->
    <ToolTip Command="GTHRM" ControlID="INFExpansionMask" Caption="INF Expansion Mask" Text="Component mask of the information report message."/>

    <ToolTip Command="GTHRM" ControlID="ACKMask" Caption="ACK Mask" Text="Component mask of the acknowledgement received."/>
    <ToolTip Command="GTHRM" ControlID="ResponseMask" Caption="Response Mask" Text="Component mask of the location report message."/>
    <ToolTip Command="GTHRM" ControlID="EventMask" Caption="Event Mask" Text="Component mask of the event report message."/>
    <ToolTip Command="GTHRM" ControlID="InformationMask" Caption="Information Mask" Text="Component mask of the information report message"/>
    <ToolTip Command="GTHRM" ControlID="HBDMask" Caption="HBD Mask" Text="Component mask of the heartbeat data."/>
    <!--<ToolTip Command="GTHRM" ControlID="CheckAllResponse" Caption="Response Mask" Text="Pick out all of the Response Mask."/>
    <ToolTip Command="GTHRM" ControlID="CheckAllEvent" Caption="Event Mask" Text="Pick out all of the Event Mask."/>
    <ToolTip Command="GTHRM" ControlID="CheckAllInformation" Caption="Information Mask" Text="Pick out all of the Information Mask."/>
    <ToolTip Command="GTHRM" ControlID="CRDMask" Caption="CRD Mask" Text="Component mask of the crash data packet."/>-->
    <!--GTCRA--><!--
    <ToolTip Command="GTCRA" ControlID="Mode" Caption="Mode" Text="Working Mode"/>
    <ToolTip Command="GTCRA" ControlID="Sensitivity" Caption="Sensitivity" Text="Sensitivity of the crash detection."/>
    <ToolTip Command="GTCRA" ControlID="ReportACC" Caption="Report ACC" Text="A numeric to indicate whether to report the acceleration data to the backend server."/>
    <ToolTip Command="GTCRA" ControlID="OutputID" Caption="Output ID" Text="Specify the ID of the output port to generate specified waveform after speed alarm is triggered."/>
    <ToolTip Command="GTCRA" ControlID="OutputStatus" Caption="Output Status" Text="Set the final status of the output port when the waveform remains high or low."/>
    <ToolTip Command="GTCRA" ControlID="Duration" Caption="Duration" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTCRA" ControlID="ToggleTimes" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>-->
    <!--GTPGD--><!--
    <ToolTip Command="GTPGD" ControlID="Mode" Caption="Mode" Text="Working Mode"/>
    <ToolTip Command="GTPGD" ControlID="Addacceleratedata" Caption="Add accelerate data" Text="Determine whether to report accelerate data message +RESP:GTCRD."/>
    <ToolTip Command="GTPGD" ControlID="Ignitionoffdelay" Caption="Ignition off delay" Text="A delay time parameter is only used when non-movement mode enable."/>
    <ToolTip Command="GTPGD" ControlID="Continuesampletimes" Caption="Continue sample times" Text="A time parameter only used when movement mode enable. "/>
    <ToolTip Command="GTPGD" ControlID="Speedminimum" Caption="Speed minimum" Text="These GPS speeds are larger than the minimum speed."/>
    <ToolTip Command="GTPGD" ControlID="Speedthreshold" Caption="Speed threshold" Text="The difference between the max speed and the min speed in these GPS data must be greater than the threshold."/>
    <ToolTip Command="GTPGD" ControlID="Directionthreshold" Caption="Direction threshold" Text="The difference between the max direction and the min direction in these GPS data must be less than this threshold."/>
    <ToolTip Command="GTPGD" ControlID="OutputID" Caption="Output ID" Text="Specify the ID of the output port to generate specified waveform after speed alarm is triggered."/>
    <ToolTip Command="GTPGD" ControlID="OutputStatus" Caption="Output Status" Text="Set the final status of the output port when the waveform remains high or low."/>
    <ToolTip Command="GTPGD" ControlID="Duration" Caption="Duration" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTPGD" ControlID="ToggleTimes" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>-->

    <!--GTPDS-->
    <ToolTip Command="GTPDS" ControlID="Mode" Caption="Mode" Text="Working Mode"/>
    <ToolTip Command="GTPDS" ControlID="Mask" Caption="Mask" Text="Bitwise mask to configure which device states will be preserved.Each bit represents a state."/>
    <!--GTBZA--><!--
    <ToolTip Command="GTBZA" ControlID="OutputID" Caption="Output ID" Text="Output ID"/>
    <ToolTip Command="GTBZA" ControlID="Alarm1Status" Caption="Alarm 1 Output Status" Text="Alarm 1 Output Status."/>
    <ToolTip Command="GTBZA" ControlID="Duration1" Caption="Duration" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTBZA" ControlID="ToggleTimes1" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>
    <ToolTip Command="GTBZA" ControlID="Alarm2Status" Caption="Alarm 2 Output Status" Text="Alarm 2 Output Status."/>
    <ToolTip Command="GTBZA" ControlID="Duration2" Caption="Duration" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTBZA" ControlID="ToggleTimes2" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>
    <ToolTip Command="GTBZA" ControlID="Alarm3Status" Caption="Alarm 3 Output Status" Text="Alarm 3 Output Status."/>
    <ToolTip Command="GTBZA" ControlID="Duration3" Caption="Duration" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTBZA" ControlID="ToggleTimes3" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>
    <ToolTip Command="GTBZA" ControlID="Alarm4Status" Caption="Alarm 4 Output Status" Text="Alarm 4 Output Status."/>
    <ToolTip Command="GTBZA" ControlID="Duration4" Caption="Duration" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTBZA" ControlID="ToggleTimes4" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>-->
    <!--GTSPA--><!--
    <ToolTip Command="GTSPA" ControlID="Mode" Caption="Mode" Text="The working mode"/>
    <ToolTip Command="GTSPA" ControlID="SpeedThresholds1" Caption="Speed Threshold 1" Text="The speed threshold."/>
    <ToolTip Command="GTSPA" ControlID="Validity1" Caption="Validity" Text=" If the speed meets the alarm condition and maintains a period of time defined by Validity, the buzzer alarm will be triggered."/>
    <ToolTip Command="GTSPA" ControlID="AlarmType1" Caption="Alarm Type" Text="The alarm type for each speed threshold, 0 means no buzzer alarm."/>
    <ToolTip Command="GTSPA" ControlID="SpeedThresholds2" Caption="Speed Threshold 2" Text="The speed threshold."/>
    <ToolTip Command="GTSPA" ControlID="Validity2" Caption="Validity" Text=" If the speed meets the alarm condition and maintains a period of time defined by Validity, the buzzer alarm will be triggered."/>
    <ToolTip Command="GTSPA" ControlID="AlarmType2" Caption="Alarm Type" Text="The alarm type for each speed threshold, 0 means no buzzer alarm."/>
    <ToolTip Command="GTSPA" ControlID="SpeedThresholds3" Caption="Speed Threshold 3" Text="The speed threshold."/>
    <ToolTip Command="GTSPA" ControlID="Validity3" Caption="Validity" Text=" If the speed meets the alarm condition and maintains a period of time defined by Validity, the buzzer alarm will be triggered."/>
    <ToolTip Command="GTSPA" ControlID="AlarmType3" Caption="Alarm Type" Text="The alarm type for each speed threshold, 0 means no buzzer alarm."/>
    <ToolTip Command="GTSPA" ControlID="SpeedThresholds4" Caption="Speed Threshold 4" Text="The speed threshold."/>
    <ToolTip Command="GTSPA" ControlID="Validity4" Caption="Validity" Text=" If the speed meets the alarm condition and maintains a period of time defined by Validity, the buzzer alarm will be triggered."/>
    <ToolTip Command="GTSPA" ControlID="AlarmType4" Caption="Alarm Type" Text="The alarm type for each speed threshold, 0 means no buzzer alarm."/>-->
    <!-- GTSSR-->
    <ToolTip Command="GTSSR" ControlID="Mode" Caption="Mode" Text="The working mode."/>
    <ToolTip Command="GTSSR" ControlID="TimeToStop" Caption="Time to Stop" Text="After the vehicle enters into start status, if it rest again and keeps in that status for this time long, \nthe vehicle is considered to leave start status."/>
    <ToolTip Command="GTSSR" ControlID="TimeToStart" Caption="Time to Start" Text="If the vehicle is detected to be moving with ignition on for this time long, it is considered to be in start status"/>
    <ToolTip Command="GTSSR" ControlID="StartSpeed" Caption="Start Speed" Text="The start speed threshold to determine whether the vehicle is start or not."/>
    <ToolTip Command="GTSSR" ControlID="LongStop" Caption="Long Stop" Text="After the vehicle enters into stop status and stay stop for this time long."/>
    <!--GTGPJ--><!--
    <ToolTip Command="GTGPJ" ControlID="Mode" Caption="Mode" Text="Working mode.0: Disable this function;1: Enable this function."/>
    <ToolTip Command="GTGPJ" ControlID="CWThreshold" Caption="CW Threshold" Text="Broadband jamming detection threshold (unit = dB)."/>
    <ToolTip Command="GTGPJ" ControlID="BBThreshold" Caption="BB Threshold" Text="Continuous wave(narrowband) jamming detection threshold (unit = dB)."/>
    <ToolTip Command="GTGPJ" ControlID="OutputID" Caption="Output ID" Text="Specify the ID of the output port to generate specified waveform after the trigger condition meets."/>
    <ToolTip Command="GTGPJ" ControlID="OutputStatus" Caption="Output Status" Text="Set the final status of the output port when the waveform remains high or low."/>
    <ToolTip Command="GTGPJ" ControlID="Duration" Caption="Duration" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTGPJ" ControlID="ToggleTimes" Caption="Toggle Times" Text="The number of square-wave generated from output port."/>-->

    <!--GTJBS--><!--
    <ToolTip Command="GTJBS" ControlID="Mode" Caption="Mode" Text="Working mode."/>
    <ToolTip Command="GTJBS" ControlID="SirenupTimer" Caption="Siren Up Timer" Text="It pointed to the siren up length of time."/>
    <ToolTip Command="GTJBS" ControlID="SirendownTimer" Caption="Siren Down Timer " Text="It pointed to the siren down length of time."/>
    <ToolTip Command="GTJBS" ControlID="SirenAlarmduration" Caption="Siren Alarm Duration" Text="It pointed to the siren Alarm length of time."/>
    <ToolTip Command="GTJBS" ControlID="PreparingAlarmTimer" Caption="Preparing Alarm Timer" Text="It pointed to the preparing alarm length of time."/>
    <ToolTip Command="GTJBS" ControlID="CutfuelTimer" Caption="Cut Fuel Timer" Text=" It pointed to cut fuel length of time."/>
    <ToolTip Command="GTJBS" ControlID="SpeedLimit" Caption="Speed Limit" Text=" the speed limit of cutting fuel."/>
    <ToolTip Command="GTJBS" ControlID="NeedJudgeMotionSensor" Caption="Need Judge Motion Sensor" Text="The GPS fixed fail is timeout, whether need judge motion sensor state to cut fuel. "/>
    <ToolTip Command="GTJBS" ControlID="GPSFixFailTimer" Caption="GPS Fix Fail Timer" Text="The valid time of GPS fix, if more than this time, we will be consider it as fix fail."/>
    <ToolTip Command="GTJBS" ControlID="Output1InitState" Caption="Output 1 Init State" Text="Set the initial state of output 1."/>-->
    <!--GTRMD-->
    <ToolTip Command="GTRMD" ControlID="Feat_Mode" Caption="Mode" Text="The working mode of the speed alarm."/>
    <ToolTip Command="GTRMD" ControlID="HomeList_Start" Caption="Home List Start Index" Text="The index range of the white list from which code are to be updated."/>
    <ToolTip Command="GTRMD" ControlID="HomeList_End" Caption="Home List End Index" Text="The index range of the white list to which code are to be updated."/>
    <ToolTip Command="GTRMD" ControlID="RoamList_Start" Caption="Roaming List Start Index" Text="The index range of the white list from which code are to be updated."/>
    <ToolTip Command="GTRMD" ControlID="RoamList_End" Caption="Roaming List End Index" Text="The index range of the white list to which code are to be updated."/>
    <ToolTip Command="GTRMD" ControlID="BlackList_Start" Caption="Black List Start Index" Text="The index range of the list from which code are to be updated."/>
    <ToolTip Command="GTRMD" ControlID="BlackList_End" Caption="Black List End Index" Text="The index range of the list to which code are to be updated."/>
    <ToolTip Command="GTRMD" ControlID="MskSet_KnR" Caption="Known Roaming Event Mask" Text="Bitwise mask to configure which event message should be sent in known roaming status."/>
    <ToolTip Command="GTRMD" ControlID="MskSet_UnKR" Caption="Known Roaming Event Mask" Text="Bitwise mask to configure which event message should be sent in unknown roaming status."/>
    <!-- GTFFC-->
    <ToolTip Command="GTFFC" ControlID="Priority" Caption="Priority" Text="Priority to the event which triggers the parameter change for fixed report. 0 is the highest priority."/>
    <ToolTip Command="GTFFC" ControlID="Mode" Caption="Mode" Text="Specify the trigger event to change the fixed report parameters"/>
    <ToolTip Command="GTFFC" ControlID="FRIMode" Caption="FRI Mode" Text="When the specified event occurs, the working mode of the fixed report will be changed according to this parameter."/>
    <ToolTip Command="GTFFC" ControlID="FRIIGNReportInterval" Caption="FRI IGN Report Interval" Text="Period to send the position information when ignition is on."/>
    <ToolTip Command="GTFFC" ControlID="FRIReportDistance" Caption="FRI Report Distance" Text="The specified distance to send the position information when change to fixed distance report."/>
    <ToolTip Command="GTFFC" ControlID="FRIReportMileage" Caption="FRI Report Mileage" Text="The specified path length to send the position information when change to fixed mileage report or optimum report."/>
    <ToolTip Command="GTFFC" ControlID="FRIIGFReportInterval" Caption="FRI IGF Report Interval" Text="Period to fix and send the position information"/>
    <ToolTip Command="GTFFC" ControlID="FRICornerRep" Caption="FRI Corner Report" Text="The threshold to determine whether unit is turning around a corner"/>
    <!--GTCMD-->
    <ToolTip Command="GTCMD" ControlID="Mode" Caption="Mode" Text="The working mode of the store command string."/>
    <ToolTip Command="GTCMD" ControlID="StoreCMDID" Caption="Store CMD ID" Text="A numeric to identify the stored command."/>
    <ToolTip Command="GTCMD" ControlID="CommandString" Caption="Command String" Text="the whole content of  the stored command."/>

    <!--GTUDF-->
    <ToolTip Command="GTUDF" ControlID="Mode" Caption="Mode" Text="The working mode of the user defined fuction."/>
    <ToolTip Command="GTUDF" ControlID="Groupid" Caption="Group ID" Text=" A numeric to identify the group of input events and stored commands to execute."/>
    <ToolTip Command="GTUDF" ControlID="InputIdMask" Caption="Input ID Mask" Text="The bitwise mask to indicate the input events that the group cares about."/>
    <ToolTip Command="GTUDF" ControlID="Debouncetime" Caption="Debounce Time" Text="The debounce time for input events before executing the specified stored commands."/>
    <ToolTip Command="GTUDF" ControlID="InzizoMask" Caption="Inzizo Mask" Text="The bitwise mask to indicate the input events within the GEO."/>
    <ToolTip Command="GTUDF" ControlID="OutzizoMask" Caption="Outzizo Mask" Text="The bitwise mask to indicate the input events outside the GEO."/>
    <ToolTip Command="GTUDF" ControlID="StocmdIdMask" Caption="Stocmd ID Mask" Text="The bitwise of the stored commands which will be executed after the state of the group becomes TRUE."/>
    <ToolTip Command="GTUDF" ControlID="Stocmdack" Caption="Stocmd Ack" Text="A numeric to indicate whether to return acknowledgement message after the stored commands are executed"/>

    <!-- GTGAM-->
    <ToolTip Command="GTGAM" ControlID="Mode" Caption="Mode" Text="Working mode."/>
    <ToolTip Command="GTGAM" ControlID="SpeedMode" Caption="Speed Mode" Text="It combines with GPS speed to measure the status of movement."/>
    <ToolTip Command="GTGAM" ControlID="MotionSpeedThreshold" Caption="Motion Speed Threshold" Text="The speed threshold which is combined with GPS speed to measure the status of movement."/>
    <ToolTip Command="GTGAM" ControlID="MotionCumulativeTime" Caption="Motion Cumulative Time" Text="If the average speed in &lt;Motion Cumulative Time&gt; is higher than &lt;Motion Speed Threshold&gt;, the device is considered to be in motion status."/>
    <ToolTip Command="GTGAM" ControlID="MotionlessCumulativeTime" Caption="Motionless Cumulative Time" Text="If the average speed in &lt;Motionless Cumulative Time&gt; is lower than &lt;Motion Speed Threshold&gt;, the device is considered to be in motionless status."/>
    <ToolTip Command="GTGAM" ControlID="GPSFixFailureTimeout" Caption="GPS Fix Failure Timeout" Text="If the time of GPS fix is more than &lt;GPS Fix Failure Timeout&gt;, the device will update motion status by motion sensor again."/>
    <!-- GTVVS-->
    <ToolTip Command="GTVVS" ControlID="IgnitionOnVoltage" Caption="Ignition On Voltage" Text="The external power voltage in ignition on state."/>
    <ToolTip Command="GTVVS" ControlID="VoltageOffset" Caption="Voltage Offset" Text="The offset from Ignition On Voltage used to determine ignition off state"/>
    <ToolTip Command="GTVVS" ControlID="Debounce" Caption="Debounce" Text="The debounce time before updating virtual ignition state according to the external power voltage."/>
    <ToolTip Command="GTVVS" ControlID="IgnitionOffDebounce" Caption="Ignition Off Debounce" Text="The debounce time to wait before updating the virtual ignition off state according to the external power voltage."/>
    <ToolTip Command="GTVVS" ControlID="SmartVoltageAdjust" Caption="Smart Voltage Adjust" Text="Disable/Enable smart voltage adjust algorithm."/>
    <!-- GTAVS-->
    <ToolTip Command="GTAVS" ControlID="SensorRestDuration" Caption="Sensor Rest Duration" Text=" A time parameter to determine whether the device enters resting state. "/>
    <ToolTip Command="GTAVS" ControlID="SensorMotionValidity" Caption="Sensor Motion Validity" Text=" A time parameter to determine whether the device enters moving state."/>
  </ToolTips>
</ManageTool>